Swag CERAMIC PRO BASE 9H / 50ml | Ceramic Coating | Hydrophobic | Protection for Years | + accessories

Swag CERAMIC PRO BASE 9H 50ml

Protection up to 5 years | Incredible hydrophobicity | "Liquid Glass"

The coating is designed for application as:

• Base Coat in Swag CERAMIC SYSTEM
• Standalone coating / single-component without Top Coat

Swag CERAMIC SYSTEM

Swag CERAMIC SYSTEM is an advanced ceramic protection system for vehicles, with the highest quality ceramic nanoparticle network, consisting of two coatings:

• Ceramic Pro Base base coat, providing the foundation for paint protection.
• Ceramic Pro Top* finishing coat with special hydrophobic properties. (*sold separately)

The synergistic combination of these two coatings enhances protective, visual, and hydrophobic properties.

The formula of Swag CERAMIC SYSTEM is based on a flexible base that continuously adapts the coating to the working conditions of the vehicle body affected by vibration and temperature.

The goal of Swag CERAMIC SYSTEM is to protect painted, plastic, and metal parts by minimizing the risk of scratching, oxidation, and corrosion caused by external negative factors. Hydrophobic properties help maintain surfaces in absolute cleanliness. The SCS system will provide protection for up to 5 years.

KEY FEATURES

• Ceramic two-component formula
• PRO BASE protection foundation
• PRO TOP finishing coat
• For professionals and advanced enthusiasts
• Permanent coating
• Liquid glass effect
• Unprecedented hardness of 9H
• Water contact angle over 130°
• Extreme hydrophobic effect
• Best long-distance protection
• Reduces the risk of scratching
• Protects against external factors
• Enhances the gloss and depth of the paint
• Brings out metallic reflections
• Speeds up vehicle maintenance
• Supports every car brand
• Coating thickness up to 1 μm
• Resistance to pH 2-11

PROTECTION TIME

• Swag CERAMIC SYSTEM | up to 5 years
• Swag CERAMIC PRO BASE | up to 3 years

APPLICATION METHOD

Swag CERAMIC SYSTEM

• It is recommended to apply in a closed room with an air temperature of at least 20°C.
• For the optimal effect, the paint should not have scratches.
• In case of degradation, polish the paint according to the technique, e.g. SWAG ONE STEP POLISH.
• The surface for application should be dry, cool, and free of grease.

STEP 1

Swag CERAMIC PRO BASE | ceramic foundation

• Shake the bottle before use.
• Apply a few drops of the product to a foam applicator wrapped in a suede cloth.
• Apply SCPB on an area up to 50x50 cm in a cross-motion – vertical/horizontal.
• Wait at least 4 minutes, gently polish the surface with a microfiber cloth to even out the coating layer.
• Proceed to the next part, following the procedure until the entire car body is covered with SCPB.
• Wait at least 3 hours; if you have an IR lamp, heat the coating at 50-60°C for 10 minutes to shorten the curing time.
• After the time interval, apply another layer following the technique. The recommended number of layers is 2-3.

STEP 2

Swag CERAMIC PRO TOP | finishing coating enhancing protection and hydrophobicity

• Wait at least 3 hours after applying the PRO BASE coating.
• Apply a few drops of the product to a foam applicator wrapped with a microfiber cloth.
• Apply SCPT on an area up to 50x50 cm in a cross-motion – vertical/horizontal.
• Wait at least 10 minutes, gently polish the surface with a microfiber cloth to even out the coating layer.
• Proceed to the next part, following the procedure until the entire car body is covered with SCPT.
• Wait at least 3 hours; if you have an IR lamp, heat the coating at 50-60°C for 10 minutes to shorten the curing time.
• After the time interval, apply another layer following the technique. The recommended number of layers is 1-2.

STEP 3 | hardening and maintenance

• The initial curing time for the coating is 12 hours – avoid water contact.
• Full curing occurs after at least 7 days.
• During this period, wash the car using only water, no chemicals.
• Only professional paint preparation and proper application guarantee excellent durability and protective properties of the coating.
• For cleaning the vehicle, use products with a neutral pH or slightly acidic/alkaline.
• For maintenance, use SWAG CERAMIC RELOADER during regular car washes.

ADDITIONAL RECOMMENDATIONS

• Do not freeze.
• Shake before use.
• Protect from sunlight.
• Store in a cool and dry place.

THE SET INCLUDES

• 1 x Swag CERAMIC PRO BASE 50ml
• 1 x Applicator
• 1 x Dropper for precise application of the coating
• 3 x Suede-type microfiber cloths for application
• 2 x Holographic certificate with space for the application date, to be placed in the vehicle threshold
• 1 x High-density microfiber cloth with laser-cut corners

CAPACITY

• 50ml | Sufficient to protect up to 2 cars.

tags:detailing, car valeting, auto detailing, swag detailing, youtube detailing, car detailing