Swag HEAVY CUT V.2 / 500ml | Polishing Compound | Heavy Abrasive Cut | Optimal Gloss

Swag HEAVY CUT V.2 500ml

Removes deep scratches | Highly abrasive grade | Optimal gloss

Swag HEAVY CUT V.2 is an aggressive Heavy Cut polishing paste. It was created for all Detailing Studios and Car Care Enthusiasts who need an advanced and uncompromising product for removing most of the paint degradation such as scratches, "sandblasting," bird droppings, or insect marks.

The formula of the polishing paste combines two technologies: PROGRESS ABRASIVE | LOW TEMP, which are a combination of particles with a wide range of abrasiveness and a paste structure with high lubrication. The synergy of these ingredients provides exceptional properties, a high cutting power, and an optimal finish quality combined with a paste base that helps dissipate heat, minimizing the risk of overheating the paint while making it easier to guide the polishing machine across the vehicle's bodywork.

The paste technology allows for work on polishing wool, foam pads, and corduroy | denim type discs. Regardless of the form and technique, Swag HEAVY CUT V.2 always provides full abrasive potential, allowing the removal of strong degradation.

Despite its strong cutting power, Swag HEAVY CUT V.2 ensures a high level of finish quality. It often allows for performing an aggressive One Step correction in a single pass. The SWAG POLISHING line of pastes features individual scents and colors that make the polishing process more enjoyable and allow for easy differentiation of paste grades.

FEATURES

• Highly abrasive grade
• PROGRESS ABRASIVE
• LOW TEMP
• Supports Heavy One Step correction
• Enormous cutting power
• Removes scratches, pitting, and matting from insects, etc.
• Optimal finish quality SPHC V.2
• Temperature reduction
• Paste structure makes machine handling easier
• Compatible with RO and DA polishers
• Powerful efficiency
• Fruit fragrance
• Unique color
• For Detailing Studios and Enthusiasts

HOW TO USE

• Use in a shaded area on a cool, clean surface.
• Shake before use.
• Apply a few drops of SPHC V.2 on a polishing pad, e.g., Cutting*
  *Choose pad hardness and type depending on the type of correction.
• Work on a working area of approximately 40 x 40 cm.
• Spread evenly over the entire area.
• Use a polishing machine.

Optimal polisher speed

• RO up to 1500 rpm.
• DA as preferred.

• Polish with moderate pressure until the paste is worked in.
• If the paint gets too hot, wait for it to cool down.
• Degrease the surface with SWAG FINAL INSPECT.
• If degradation still exists after inspection, repeat the process.

ADDITIONAL RECOMMENDATIONS

• Do not freeze.
• Shake before use.
• Protect from sunlight.
• Store in a cool, dry place.

CAPACITY

• 500ml

tags:swag detailing, auto detailing, car detailing, car valeting, youtube detailing, detailing,